LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (Wheels, Tires And Wheel Alignment (Wheel And Tire Guide General Information) (Convertible)) >> 44 Wheels, Tires And Wheel Alignment >> Disc Wheel (Rim), Information >> Disc Wheel (Rim), Structure

Disc Wheel (Rim), Structure

WARNING: This page is about a different variant/trim than selected.
Fig 1: Exploded View Of Rim
GWWN44-10340Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. Rim Flange
    • Stop for the side tire beads
  2. Hump (H2) on Both Bead Seats
    • Prevents the tire from slipping off the bead seat when driving around tight curves
    • An extended hump (EH2) is required when using run-flat tires. Refer to IDENTIFICATION .
  3. Bed
    • Makes it easier to mount the tire
  4. A -  Rim Width
    • Distance between the tire contact surfaces on both rim flanges
    • Dimensions in inches
  5. B -  Rim Diameter
    • Distance between the rim contact surfaces on the opposite bead seats
    • Dimensions in inches
  6. C -  Offset
    • Distance between the vertical wheel center and the inner wheel contact surface
    • Dimensions in mm
  7. D -  Pitch Circle Diameter
    • Circle diameter where the wheel bolt holes are located
    • Dimensions in mm
  8. E -  Center Hole
    • Enables centering
    • Dimensions in mm
scientia non olet · About LEMON Manuals