8 J X 18 ET48
WARNING: This page is about a different variant/trim than selected.
NOTE:
Always pay attention to the wheel/tire allocations to the respective engine types which are listed in the overview table.
| Explanation of specifications on disc wheels: | Refer to GENERAL INFORMATION . |
| Tightening specifications for wheel bolts: | Refer to WHEEL BOLT TIGHTENING SPECIFICATIONS . |
| Pitch circle diameter: | 112 mm |
| Number of wheel bolt holes: | 5 |
5C0 601 025 H, 5C0 601 025 BA - "DISC" Aluminum Rim
Rim 5C0 601 025 H is used together with the wheel cover -1-.
- Wheel cover 5C0 601 149 C
| Dimension: | 8 J x 18 |
| Offset in mm: | 48 |
| Wheel load in kg: | 565 |
5C0 601 025 AK - "TWISTER" Aluminum Rim
| Dimension: | 8 J x 18 |
| Offset in mm: | 48 |
| Wheel load in kg: | 580 |
5C0 601 025 BG, 5C0 601 025 BH - "RAVENNA" Aluminum Rim
| Dimension: | 8 J x 18 |
| Offset in mm: | 48 |
| Wheel load in kg: | 590 |