Fastener Tightening Specifications
WARNING: This page is about a different car, the 2015 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
| Components | Fastener Size | Nm |
|---|---|---|
| Charge air pressure sensor | - | 9 |
| Charge air temperature sensor after charge air cooler 1 | - | 22 |
| Connection bolt | - | 8 |
| Coolant pipe bolts | - | 10 |
| Emissions control module bracket - tightening specifications and tightening sequence | - | Refer to Figure |
| Heat shield | - | 15 |
| Intake air temperature sensor | - | 22 |
| Intake manifold with charge air cooler | - | 8 |
| Oil supply line banjo bolt | - | 30 |
| Oil supply line bolt | - | 12 |
| Oil supply line union nut | - | 22 |
| Oil return line bolt | - | 10 |
| Oil return line ribbed bolt | - | 14 |
| Pulsation damper bolt | - | 8 |
| Throttle valve control module | - | 8 |
| Throttle valve control module bolt | - | 8 |