Charge Air Pressure Sensor -G31-: Removing
WARNING: This page is about a different car, the 2015 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the engine cover, refer to ENGINE COVER .
-- Disconnect the connector -3-.
-- Spray the hose on the Charge Air Pressure Sensor - G31- with solvent before disconnecting.
CAUTION:
There is a risk of damaging the charge air pressure sensor by breaking the connection.
- Remove the hose carefully and evenly from the connection.
-- Remove the bolts -2- and the Charge Air Pressure Sensor - G31-.