LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (1.8L & 2.0L Turbocharger, Supercharger - Engine Code(S): CPKA, CPLA, CPPA & CPRA (Convertible)) >> 21 Turbocharger, Supercharger >> Description And Operation >> Overview - Turbocharger >> OVERVIEW - TURBOCHARGER, COOPER Charge Pressure Actuator -V465-

OVERVIEW - TURBOCHARGER, COOPER Charge Pressure Actuator -V465-

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, and 2014 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Turbocharger (Cooper) Overview
GWWM21-10019Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. Heat Shield
  2. Bolt
    • 9 Nm
  3. Bolt
    • 20 Nm
  4. Bolt
    • 9 Nm
  5. Charge Pressure Actuator -V465-
    • Cooper type
    • Can be replaced only with the turbocharger, refer to TURBOCHARGER .
  6. Bolt
    • Do not remove the Charge Pressure Actuator -V465-.
    • Replace turbocharger after loosening bolt.
  7. Nut
    • 7 Nm
  8. Bolt
    • 7 Nm
  9. Bolt
    • Replace turbocharger after loosening bolt.
    • Do not remove the Charge Pressure Actuator -V465-.
  10. Turbocharger Recirculation Valve -N249-
  11. O-Ring
    • Replace after removing
  12. Turbocharger
  13. Spring Clip
  14. O-Ring
    • Replace after removing
    • Coat with coolant
  15. Coolant Supply Line
  16. Bolt
    • 9 Nm
  17. Bolt
    • 9 Nm
  18. O-Ring
    • Replace after removing
    • Coat with engine oil
  19. Bolt
    • 25 Nm
  20. Oil Return Pipe
  21. O-Ring
    • Replace after removing
    • Coat with engine oil
  22. O-Ring
    • Replace after removing
    • Coat with coolant
  23. Bolt
    • 9 Nm
  24. Bolt
    • 9 Nm
  25. Coolant Supply Line
  26. Bolt
    • 9 Nm
  27. O-Ring
    • Replace after removing
    • Coat with coolant
  28. Bolt
    • 30 Nm
  29. Support Brace
  30. Bolt
    • 30 Nm
    • Lubricate the thread with hot bolt paste before loosening and installing.
  31. Heat Shield
  32. V-clamp
    • 15 Nm
    • Replace after removing
  33. Bolt
    • 9 Nm
  34. O-Ring
    • Replace after removing
    • Coat with engine oil
  35. Oil Supply Line
  36. O-Ring
    • Replace after removing
    • Coat with engine oil
  37. Seal
    • Replace after removing
  38. Nut
    • 25 Nm
    • Replace after removing
  39. Heat Shield
  40. Bolt
    • 4.5 Nm
  41. Bolt
    • 9 Nm
scientia non olet · About LEMON Manuals