Bench Seat Cover And Cushion: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the bench seat. Refer to SEAT BENCH/SINGLE SEAT .

Fig 1: Locating Upholstery Clips

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Cut the upholstery clips -arrows- for the profile -1-, -2- and -3- on the bottom of the bench seat.

NOTE:

The upholstery clips are destroyed during removal. They must be replaced when installing. Therefore use the Upholstery Clip Pliers VAG 1634.

-- Cut the remaining upholstery clips and roll up the cover on the edges.

-- Cut the remaining upholstery clips -arrows-.

-- Remove the cover from the cushion.