Parking Aid Control Module -J446-, Adapting Functions
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Among other functions, the following functions in "Guided Fault Finding" can be performed on the Parking Aid Control Module -J446- using the Vehicle Diagnostic Tester:
- Coding Parking Aid Control Module -J446-
- Adapting the optical illustration
- Parking aid system output Diagnostic Test Mode (DTM)
Procedure
-- Connect the Vehicle Diagnostic Tester.
-- Select Guided Fault Finding .
-- Use the GO TO button to select the "function/component selection" and the following menu options one after the other:
- Body
- Installation work interior/exterior
- 10 - Parking Aid Control Module II
- 10 - Parking Aid Control Module II functions
- Select the desired function