Access/Start Authorization Control Module -J518-, Coding
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
The "access/start authorization system" must be coded after the Access/Start Authorization Control Module -J518- has been replaced.
Procedure
-- Connect the Vehicle Diagnostic Tester.
-- Select Guided Fault Finding .
-- Use the GO TO button to select the "function/component selection" and the following menu options one after the other:
- Body
- Installation work interior/exterior
- 05 - Access and start authorization
- 05 - Access and start authorization function
- 05 - Coding access and start authorization (Repair group 57)