Passenger Occupant Detection System Control Module Bracket: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Attach the Engine/Transmission Holder - Seat Repair Fixture VAS 6136 to the Engine and Transmission Holder VAS 6095.

-- Remove the front seat. Refer to FRONT SEAT .

-- Secure the seat on the Engine/Transmission Holder - Seat Repair Fixture VAS 6136.

-- Remove the Passenger Occupant Detection System Control Module -J706-. Refer to PASSENGER OCCUPANT DETECTION SYSTEM CONTROL MODULE .

Fig 1: Identifying Bracket And Seat Frame

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Loosen the clips -1-.

-- Remove the bracket -2- from the seat frame -3- in direction of -arrow-.