LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Passenger Protection, Airbags & Seat Belts (Convertible)) >> 69 Passenger Protection, Airbags, Seat Belts >> Removal And Installation >> Airbag Control Module -J234- >> Installing

Airbag Control Module -J234-: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Install in reverse order of removal.

-- Turn on the ignition.

WARNING: Make sure that no persons are in the vehicle.

-- Connect the battery. Refer to [For transmission(s) 0A4,02E,09G,02Q] [For engine(s) CVCA,CPRA,CPKA,CPLA,CJAA,CBUA,CPPA,CCTA,CBFA] Removal and Installation .

-- Code the Airbag Control Module -J234- if it was replaced. Refer to Adapting Components .