Wire Routing And Securing
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
There is a risk of damaging lines.
It is possible to damage the wires with the moving or hot components.
-- Route wire in the original wiring guide.
-- Ensure sufficient clearance to moving or hot components.
- Mark the individual fuel and vacuum lines for the Evaporative Emission (EVAP) canister system as well as the electrical wires before disconnecting and/or removing them. This will prevent a mix-up when reconnecting them. If necessary, draw sketches or take pictures.