LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (Wiring - General Information (Convertible)) >> 97 Wiring >> Connectors >> Wiring Harnesses And Connectors, Repairing >> Wiring Harness Repair Set VAS 1978A

Wiring Harness Repair Set VAS 1978A

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

The new Wiring Harness Repair Set VAS 1978A makes optimal repair quality possible in the realm of vehicle electronics. Using the new pliers, repairs affecting harness connectors and for breaks in wiring can be performed. For this purpose, complete repair wires with terminals already crimped on are used and can be connected to vehicle-specific wiring harness by the use of the 4 different types of crimp connections. A new Wiring Harness Repair - Crimping Plier - Base Tool VAS 1978/1-2 with exchangeable Wiring Harness Repair - Crimping Head -.35-2.5mm VAS 1978/1-1 or Wiring Harness Repair Set - Crimping Head - 4-6mm VAS 1978/2A and a Wiring Harness Repair Set - Hot Air Blower VAS 1978/14A for shrinking the crimp connectors provide a trouble-free electrical connection.

Fig 1: Identifying Wiring Harness Repair Set (VAS 1978A)
GWWW00-10400Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Additional information:

The Wiring Harness Repair Set VAS 1978A was replaced by the Wiring Harness Repair Set VAS 1978B.