LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (Wiring - General Information (Convertible)) >> 97 Wiring >> Connectors >> Wiring Harnesses And Connectors, Repairing >> Single Wire Seal Assembly Tools

Single Wire Seal Assembly Tools

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Assembly tools serve the purpose of allowing the single wire seals to be slid without damage into the connector housing up to stop, this achieves a complete seal between a single wire and connector housing.

Fig 1: Identifying Terminal Assembly Tool
GWWN97-10293Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Four assembly tools for single wire seals are components of the Wiring Harness Repair Set VAS 1978/Wiring Harness Repair Set VAS 1978A/Wiring Harness Repair Set VAS 1978B.