LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (Wiring - General Information (Convertible)) >> 97 Wiring >> Connectors >> Wiring Harnesses And Connectors, Repairing >> Contact Release Tools

Contact Release Tools

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Various release tools are used to remove the different terminals from the connector housing without damage.

Fig 1: Identifying Use Of Release Tool To Remove Fasten Connector Terminal
GWWN97-10290Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

A selection of release tools is a component of the Wiring Harness Repair Set VAS 1978/Wiring Harness Repair Set VAS 1978A/Wiring Harness Repair Set VAS 1978B. The Release Tool Set VAS 1978/35 contains the entire set of release tools.

WARNING:

Some tools are supplied with a tool safety clip, which is slid over the tool points after using the tool, in order to protect other workers from injuries and tool points from damage.