Clutch Slave Cylinder With Release Bearing: Notes
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Torque Wrench (5-50 Nm) V.A.G 1331
NOTE:
The clutch slave cylinder and the release bearing are a single unit and are replaced together.
Pay attention to the thread pitch on the bolts when cleaning the threaded hole in the clutch housing.