Special Tools

Special tools and workshop equipment required 

• Thrust Piece T10368
• Guide Sleeve T20097
• Support Bracket 10-222 A/31
• Dial Gauge Holder VW 387
  Fig 1: Dial Gauge Holder VW 387

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Dial Gauge 0-10 mm VAS 6079
  Fig 2: Dial Gauge 0-10 mm VAS 6079

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Locking Pin T10060 A
  Fig 3: Identifying Locking Pin T10060 A

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Counter Hold Tool T10355
  Fig 4: Counter-Holder Tool T10355

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Torque Wrench (5-50 Nm)V.A.G 1331
  Fig 5: Identifying Torque Wrench (5 To 50 Nm) V.A.G 1331

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Thrust Piece T10354
  Fig 6: Identifying Thrust Piece T10354

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Pulling Hook T20143/2
  Fig 7: Extractor Hook T20143

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Flywheel Retainer 3067
  Fig 8: 3067 Counter-Hold Tool

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
• Puller T10394
  Fig 9: Identifying Puller T10055

  Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required 

• Centering Mandrel 3176 or Drift VW 207 C
• Kukko Extractor 14.5-18.5 mm 21/2
• Puller T10055 and Adapter T10055/3

Fig 10: Identifying Engine Support Bridge Components

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required 

• Mount T40093/5 from the Engine Support Supplement Set T40093
• Moveable Joint T40093/4 from the Engine Support Supplement Set T40093 (quantity: 2)
• Rail with Holes T40091/2 from the Engine Support Basic Set T40091
• Square Pipe T40091/1 from the Engine Support Basic Set T40091 (quantity: 2)
• Moveable Joint T40091/3 from the Engine Support Basic Set T40091 (quantity: 2)
• Engine Support Bridge 10-222 A
• Adapter 10-222 A/28
• Adapter 10 - 222 A/28-1 (quantity: 2)
• Shackle 10-222 A/12
• Bracket with Spindle and Hook 10-222 A/10
• Spindle 10-222 A/11