LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (2.0L - Crankshaft, Cylinder Block - Engine Code(S): CBFA & CCTA (Convertible)) >> 13 Crankshaft, Cylinder Block >> Removal And Installation >> Flywheel >> Installing

Removal And Installation: Flywheel: Installing

WARNING: This page is about a different car, the 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

Cylinder block overview, transmission side. Refer to CYLINDER BLOCK OVERVIEW, TRANSMISSION SIDE .

-- Secure with new bolts.

-- Install the flywheel retainer 3067 into the hole in the cylinder block -A-.

Fig 1: Identifying Retainer -3067- Inserted In Hole On Cylinder Block
GWWA13-0051Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.