LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (2.0L - Crankshaft, Cylinder Block - Engine Code(S): CBFA & CCTA (Convertible)) >> 13 Crankshaft, Cylinder Block >> Removal And Installation >> Crankshaft Needle Bearing >> Removing

Crankshaft Needle Bearing: Removing

WARNING: This page is about a different car, the 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the needle bearing using a commercially available puller, for example, Kukko extractor 14.5-18.5 mm21/2 -arrow-, and the adapter T10055/3 and the puller T10055.

Fig 1: Identifying Standard Extractor E.G. Kukko 21/2, Adapter T10055/3 And Puller T10055
GWWN13-10062Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
scientia non olet · About LEMON Manuals