LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (2.0L - Cooling System - Engine Code(S): CBFA & CCTA (Convertible)) >> 19 Cooling System >> Removal And Installation >> Small Coolant Pipe >> Removing

Small Coolant Pipe: Removing

WARNING: This page is about a different car, the 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Remove the air filter housing. Refer to AIR FILTER HOUSING .

-- Loosen the hose clamp -2-.

Fig 1: Air Guide Hose Bolts, Air Guide Pipe Hose Clamps & Electrical Harness Connector
GWWA21-10161Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolt -4-.

-- Disconnect electrical connector -arrow-.

-- Remove the bolt -1- and remove the charge air pipe downward.

-- Remove the bolts -arrows- and remove the electrical connectors -1 through 3- from the bracket.

Fig 2: Electrical Connectors And Bolts
GWWA19-10451Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Free up the wiring harness on the small coolant pipe -arrow-.

Fig 3: Coolant Hoses, Bolts And Coolant Pipe
GWWA19-10453Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -2 and 3-.

-- Disconnect the small coolant pipe from the coolant pump and from the coolant hoses -1 and 4-.