LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (2.0L - Cooling System - Engine Code(S): CBFA & CCTA (Convertible)) >> 19 Cooling System >> Removal And Installation >> Fan Shroud >> Removing

Fan Shroud: Removing

WARNING: This page is about a different car, the 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the bolts -1- at the top.

Fig 1: Fan Shroud Bolts And Electrical Connector
GWWA19-10146Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
NOTE:

The left bolt is under the coolant connector.

-- Remove the noise insulation. Refer to Removal and Installation .

-- Disconnect the connector -2-.

Fig 2: Fan Shroud Bolts And Electrical Connector
GWWA19-10146Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -3- and remove the fan shroud downward.