Lower Front Coolant Line: Installing

WARNING: This page is about a different car, the 2015 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the seals and O-ring after removal.

Secure all hose connections with hose clamps, refer to the Parts Catalog.

-- Clean and smooth out the seals and O-ring sealing surfaces.

-- Coat the seals and O-rings with coolant.

-- Install the oil filter housing, refer to OIL FILTER HOUSING .

-- Connect the coolant hose to the coupling, refer to Figure.

-- Fill the coolant, refer to COOLANT, DRAINING AND FILLING .