LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (2.0L - Cooling System - Engine Code: CVCA (Convertible)) >> 19 Cooling System >> Removal And Installation >> Front Upper Coolant Pipe >> Removing

Front Upper Coolant Pipe: Removing

WARNING: This page is about a different car, the 2015 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the engine cover, refer to ENGINE COVER .

-- Drain the coolant, refer to COOLANT, DRAINING AND FILLING .

-- Unclip the bracket -1- with the fuel hoses.

Fig 1: Identifying Bracket
GWWA19-11570Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows-.

-- Loosen the hose clamp -3- and remove the coolant hose.

-- Remove the bolts -1- and -2-.

-- Loosen the clamps -arrows- and remove the coolant hoses.

-- Remove the front upper coolant pipes.

Fig 2: Identifying Bolts
GWWA19-11814Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.