LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (2.0L - Cooling System - Engine Code: CVCA (Convertible)) >> 19 Cooling System >> Removal And Installation >> Cylinder Head Coolant Valve -N489- >> Installing

Cylinder Head Coolant Valve -N489-: Installing

WARNING: This page is about a different car, the 2015 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the O-rings after removing them.

-- Install the upper toothed belt guard, refer to TOOTHED BELT GUARD .

Tightening Specifications 

scientia non olet · About LEMON Manuals