Fastener Tightening Specifications
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, and 2014 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
| Components | Fastener Size | Nm |
|---|---|---|
| Toothed belt cover bolt | - | 9 |
| Connecting piece bolt | - | 9 |
| Drive Gear for Toothed Belt bolt1, 2 | - | 10 + 90° |
| Plastic sockets to bracket for After-Run Coolant Pump -V51- bolt | - | 5 |
| Bracket to bracket for After-Run Coolant Pump -V51- nut | - | 9 |
| Bracket connecting After-Run Coolant Pump -V51- to engine bolt | - | 20 |
| Engine Coolant Temperature Sensor on Radiator Outlet -G83- bolt1 | - | 4 + 45° |
| Front coolant pipe bolt | - | 6 |
| Upper coolant pipe bolt | - | 9 |
| Coolant line bolt | - | 9 |
| Condenser bolt | - | 8 |
| Radiator bolt | - | 8 |
| Fan shroud bolt | - | 8 |
| Fan motor to shroud bolt | - | 5 |
| Auxiliary cooler with bracket nut | - | 25 |
|
||