Upper Coolant Pipes: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, and 2014 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Bracket And Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the ignition coil for cylinder "3", refer to IGNITION COILS WITH POWER OUTPUT STAGES -N70-, -N127-, -N291- AND -N292- .

-- Release retainers in the direction of -arrows- and remove wiring duct -1- from bracket.

-- Clamp off the coolant hoses -arrow- with the Hose Clamps - Up To 25 mm 3094.

Fig 2: Locating Clamps And Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Loosen the clamps and remove the coolant hoses.

-- Remove the bolt -1- and remove the upper coolant pipe.