LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (1.8L & 2.0L - Cooling System - Engine Code(S): CPLA, CPPA, CPKA & CPRA (Convertible)) >> 19 Cooling System >> Removal And Installation >> Engine Coolant Temperature Sensor -G62- >> Installing

Engine Coolant Temperature Sensor -G62-: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, and 2014 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE: Replace the O-rings.

-- Check the coolant level, refer to Check The Coolant Level In The Coolant Reservoir .

scientia non olet · About LEMON Manuals