Coolant Pump: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, and 2014 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Make sure the pump -1- on the controller housing -2- and the seal -3- are seated properly -arrows-.

Fig 1: Identifying Controller Housing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the coolant pump bolts, refer to Figure.

-- After installing a new coolant pump -2-, remove the cap -1- from the drive wheel.

Fig 2: Identifying Coolant Pump

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the toothed belt on the coolant pump, refer to Installing .

-- Fill the coolant, refer to Filling .