LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (1.8L & 2.0L - Cooling System - Engine Code(S): CPLA, CPPA, CPKA & CPRA (Convertible)) >> 19 Cooling System >> Removal And Installation >> Coolant Pipes >> Removing

Coolant Pipes: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, and 2014 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the air filter housing, refer to AIR FILTER HOUSING .

-- Disconnect the coolant hoses -1- and -2- with Hose Clamps up to 25 mm Diameter 3094.

Fig 1: Identifying Coolant Hose Clamps
GWWA19-11612Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Loosen the clamps and remove the coolant hoses.

-- Remove the bolts -arrows- and the front coolant pipe.