LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (1.8L & 2.0L - Cooling System - Engine Code(S): CPLA, CPPA, CPKA & CPRA (Convertible)) >> 19 Cooling System >> Removal And Installation >> Auxiliary Cooler >> Removing

Auxiliary Cooler: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, and 2014 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the left front wheel housing liner, refer to FRONT WHEEL HOUSING LINER .

-- Clamp off both coolant hoses -1- with Hose Clamps - Up To 25 mm 3094 -3-.

Fig 1: Identifying Auxiliary Cooler And Bracket
GWWM19-10051Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Open the spring-type clamps -arrows- to remove both coolant hoses -1- from the auxiliary cooler -2-.

-- Remove nuts -arrows- and auxiliary cooler -1- with bracket -2-.

Fig 2: Identifying Auxiliary Cooler And Bracket
GWWM19-10050Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
NOTE: Disengage the air guide from the radiator when removing the auxiliary cooler.