LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (1.8L & 2.0L - Cooling System - Engine Code(S): CPLA, CPPA, CPKA & CPRA (Convertible)) >> 19 Cooling System >> Description And Operation >> Connection Diagram - Coolant Hoses >> Coolant Hose Connection Diagram, Without Coolant Auxiliary Cooler

Coolant Hose Connection Diagram, Without Coolant Auxiliary Cooler

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, and 2014 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Coolant Hose Connection Diagram (Without Coolant Auxiliary Cooler)
GWWM19-10036Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. Coolant Reservoir
  2. Coolant Reservoir Cap
  3. Turbocharger
  4. Exhaust Manifold
    • Integrated in cylinder head
  5. Cylinder Head/Cylinder Block
    • Change the coolant after replacing
  6. Heater Core for Heater
    • Change the coolant after replacing
  7. Coolant Pump
  8. Transmission Fluid Cooler
  9. Engine Coolant Temperature Sensor -G62-
  10. Coolant Thermostat Housing
  11. Radiator
    • Change the coolant after replacing
    • Removing and installing, refer to RADIATOR .
  12. Charge Air Cooler
  13. Block Heater
    • Optional equipment level
  14. Engine Coolant Temperature Sensor on Radiator Outlet -G83-
  15. Coolant Recirculation Pump
    • Optional equipment level
  16. After-Run Coolant Pump -V51-