LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (1.8L & 2.0L - Cooling System - Engine Code(S): CPLA, CPPA, CPKA & CPRA (Convertible)) >> 19 Cooling System >> Description And Operation >> Connection Diagram - Coolant Hoses >> Coolant Hose Connection Diagram, With Coolant Auxiliary Cooler

Coolant Hose Connection Diagram, With Coolant Auxiliary Cooler

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, and 2014 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Coolant Hose Connection Diagram (With Coolant Auxiliary Cooler)
GWWM19-10037Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. Coolant Reservoir
  2. Coolant Reservoir Cap
  3. Turbocharger
  4. Exhaust Manifold
    • integrated in cylinder head
  5. Cylinder Head/Cylinder Block
    • Change the coolant after replacing
  6. Heater Core for Heater
    • Change the coolant after replacing
  7. Coolant Pump
  8. Transmission Fluid Cooler
  9. Thermostat
    • Not installed on all vehicles
  10. Engine Coolant Temperature Sensor -G62-
  11. Coolant Thermostat Housing
  12. Auxiliary Cooler
  13. Radiator
    • Change the coolant after replacing
    • Removing and installing, refer to RADIATOR .
  14. Charge Air Cooler
  15. Engine Coolant Temperature Sensor on Radiator Outlet -G83-
  16. Block Heater
    • Optional equipment level
  17. After-Run Coolant Pump -V51-