LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (2.0L - Exhaust System, Emission Controls - Engine Code: CVCA (Convertible)) >> 26 Exhaust System, Emission Controls >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2015 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Components Fastener Size Nm
Clamping sleeve - 23
Cover Nut - 2
Differential Pressure Sensor Dial Gauge - 9
Differential Pressure Sensor Dial Gauge Union Nut - 45
EGR Motor Bolt - 9
Exhaust Gas Temperature Sensor 1 - 45
Exhaust Gas Temperature Sensor 2 - 60
Exhaust Gas Temperature Sensor 3 - 60
Exhaust Gas Temperature Sensor 4 - 60
Filler Tube Bolt - 11
Front Exhaust Pipe Bracket Bolt - 20
Front Exhaust Pipe Screw-Type Clamp - 7
Rear Muffler Screw-Type Clamp Bracket Bolt - 20
Reducing Agent Delivery Module - 5.75
Reducing Agent Injector Screw Type Clamp - 5
Reducing Agent Tank Bolts - 25
Retaining Loop - 20
Threaded Connection On Front Exhaust Pipe - 9