Reducing Agent Heater Control Module -J891-: Removing

WARNING: This page is about a different car, the 2015 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the front passenger seat. FRONT SEATS .

-- Remove the sill panel strip, refer to PASSENGER COMPARTMENT TRIM .

-- Fold up the carpet under the front passenger seat, refer to PASSENGER COMPARTMENT TRIM .

-- Release and disconnect the connector -3-.

-- Unclip the bracket -2- from the body.

-- Release the catch -arrow- and remove the Reducing Agent Metering System Control Module - J880- -1- from the bracket.

Fig 1: Identifying Reducing Agent Metering System Control Module

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.