LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (2.0L - Exhaust System, Emission Controls - Engine Code: CVCA (Convertible)) >> 26 Exhaust System, Emission Controls >> Removal And Installation >> Front Exhaust Pipe >> Removing

Front Exhaust Pipe: Removing

WARNING: This page is about a different car, the 2015 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the noise insulation, refer to NOISE INSULATION OVERVIEW, CONVERTIBLE .

-- Disconnect the connector -1-.

Fig 1: Identifying Clamping Sleeve
GWWA26-11262Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Loosen the clamping sleeve -2- and slide it toward the rear.

-- Remove the bolts -1-.

-- Loosen the bolt -2- and the clamp.

-- Remove the front exhaust pipe.

Fig 2: Identifying Bolts
GWWA26-11261Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.