LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (2.0L - Engine Assembly - Engine Code(S): CBFA & CCTA (Convertible)) >> 10 Engine Assembly >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Component Fastener Size Nm
Bolts and Nuts
- M6 9
M7 15
M8 23
M10 40
M12 60
Engine Mount to Body Bolt (1) - 40 + 90°
Engine Mount Bracket to Engine Bolt (1) - 40 + 180°
Engine Mount to Engine Mount Bracket Bolt (1) - 60 + 90°
Pendulum Support to Subframe Bolt 1, 2 - 100 + 90°
Pendulum Support to Transmission Bolt (1) - 50 + 90°
Support to Body Bolt (1) - 20 + 90°
Support to Engine Mount Bolt (1) - 20 + 90°
Transmission Mount to Body Bolt (1) - 40 + 90°
Transmission Mount to Transmission Mount Bracket Bolt 1 - 60 + 90°
(1) Always replace
(2) First, install the pendulum support bolt to the transmission and then the bolts to the subframe.
scientia non olet · About LEMON Manuals