Tightening Specifications

WARNING: This page is about a different car, the 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Engine Mount & Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

= 40 Nm + an additional 90° (1/4) turn, replace the bolt
= 20 Nm + an additional 90° (1/4) turn, replace the bolt
= 60 Nm + an additional 90° (1/4) turn, replace the bolt

Adjust the engine mount if necessary. Refer to ENGINE AND TRANSMISSION MOUNT, ADJUSTING .