ENGINE, SECURING TO THE Engine and Transmission Holder VAS 6095: Procedure

WARNING: This page is about a different car, the 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Separate the transmission from the engine. Refer to ENGINE AND TRANSMISSION, SEPARATING .

-- Install the engine sling 2024 A as shown and lift the engine using the shop crane - load cap = 700-1200 KGVAS 6100 off the engine-/gearbox jack V.A.G 1383 A.

Fig 1: Engine Lifted

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

CAUTION: Use the securing pins -arrows- on the hooks and pins to prevent damaging the engine.

-- Secure the engine to the engine and transmission holder VAS 6095.