Engine, Holding In Its Installed Position: Notes
WARNING: This page is about a different car, the 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Mount T40093/5 from the Engine Support Supplement Set T40093
- Moveable Joint T40093/4 from the Engine Support Supplement Set T40093 (quantity: 2)
- Rail with Holes T40091/2 from the Engine Support Basic Set T40091
- Square Pipe T40091/1 from the Engine Support Basic Set T40091 (quantity: 2)
- Moveable Joint T40091/3 from the Engine Support Basic Set T40091 (quantity: 2)
- Engine Support Bridge 10-222 A
- Adapter 10-222 A/28
- Adapter 10 - 222 A/28-1 (quantity: 2)
- Shackle 10-222 A/12
- Bracket with Spindle and Hook 10-222 A/10
- Spindle 10-222 A/11
- Support Bracket 10-222 A/31
- Torque Wrench (5-50 Nm) V.A.G 1331