Engine Mount: Removing

WARNING: This page is about a different car, the 2015 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the engine cover, refer to REMOVING .

-- Remove the filler tube from the windshield wiper fluid reservoir, refer to WIPER/WASHER SYSTEMS .

-- Support the engine and transmission in the installation position, refer to ENGINE, SUPPORTING IN INSTALLED POSITION .

-- Slightly pretension the engine/transmission assembly with the spindle, do not lift.

-- Remove the bolts -A to C- and remove the engine mount.

Fig 1: Engine Mount

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.