Engine And Transmission, Separating, Vehicles With Manual Transmission: Procedure

WARNING: This page is about a different car, the 2015 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Engine/transmission assembly removed and secured on the Engine Support T10497.

-- Remove the starter, refer to STARTER .

-- Remove bolts -arrows- and remove the transmission support.

Fig 1: Identifying Console From Transmission, Removal/Installation

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the Transmission Lift Hook T40013 on the transmission and close locking device.

Fig 2: Engaging Workshop Crane VAS 6100 With Additional Hooks 10-222 A/2 At Lifting Tackle

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Engage the Shop Crane VAS 6100 with Engine Support Bridge - Additional Hooks (2 pc.) 10-222A/2 on the transmission lift hook.

-- Remove the bolts -1, 2, 5, 6, 7 and 8- connecting the transmission to the engine.

Fig 3: Identifying Bolts On Engine/Transmission Flange, Removal

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the transmission from the engine, pay attention to the intermediate plate while doing so.