LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (1.8L & 2.0L - Engine Assembly - Engine Code(S): CPKA, CPLA, CPPA & CPRA (Convertible)) >> 10 Engine Assembly >> Removal And Installation >> Engine Mount >> Installing

Engine Mount: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Observe the following for all installations, especially in engine compartment due to lack of room:
  • Route lines of all types (for example for fuel, hydraulic, EVAP canister system, coolant and refrigerant, brake fluid, vacuum) and electrical wiring so that the original path is followed.
  • To prevent damage to the lines, make sure there is sufficient clearance to all moving or hot components.

Install in reverse order of removal. Note the following:

scientia non olet · About LEMON Manuals