ATF Strainer: Installing
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
-- Lightly coat the seals on the ATF strainer suction collar with ATF.
-- Replace the ATF strainer if the gaskets are loose or faulty.
-- Mount the ATF strainer -A- on the valve body and tighten the screws -arrows-. For the correct tightening specification.
-- Install the ATF pan. Refer to OIL PAN .
-- Fill the ATF and check the level. Refer to ATF LEVEL, CHECKING .