Data Bus On Board Diagnostic Interface -J533-, Adapting Functions
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
The following functions for the Data Bus On Board Diagnostic Interface -J533- can be performed using the Vehicle Diagnostic Tester in "Guided Fault Finding" :
- Data Bus On Board Diagnostic Interface -J533-, Removal and installation
- Data Bus On Board Diagnostic Interface -J533-, Coding
- Checking bus activity
Procedure
-- Connect the Vehicle Diagnostic Tester.
-- Select Guided Fault Finding .
-- Use the GO TO button to select the "function/component selection" and the following menu options one after the other:
- Body
- Electrical system interior/exterior
- 01 - On Board Diagnostic (OBD)
- 19 - Data Bus On Board Diagnostic Interface | J519
- 19 - Diagnose interface for data bus functions
- Select the desired function