Clutch Overview, With Dual Mass Flywheel, Manufactured By SACHS

WARNING: This page is about a different car, the 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Clutch (Sachs) Component Overview

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Dual Mass Flywheel
- Removing and installing, refer to [For engine(s) CPRA, CPKA, CPLA, CPPA] Removal and Installation [For engine(s) CVCA] Removal and Installation [For engine(s) CCTA, CBFA] Removal and Installation [For engine(s) CBUA] Removal and Installation .
- Make sure it fits securely on the centering pins.
- Keep the clutch lining contact surface free of grooves, oil and grease.
- Follow the removal procedure, refer to Fig 3.
Clutch Disc
- Allocation.
- Removing and installing, refer to CLUTCH, WITH DUAL MASS FLYWHEEL, MANUFACTURED BY SACHS .
- Only replace together with the pressure plate.
- Installed position, refer to Figure.
Pressure Plate
- Allocation.
- With an adjustment mechanism.
- Only replace together with the clutch disc.
- How to recognize, refer to Fig 2.
- Removing and installing, refer to CLUTCH, WITH DUAL MASS FLYWHEEL, MANUFACTURED BY SACHS .
- Checking the ends of the diaphragm spring, refer to Figure.
- Checking the spring and rivet connections, refer to Figure.
Bolt
- M6 - 13 Nm
- M7 - 20 Nm
- Loosen and tighten in small steps and in a diagonal sequence.
- Allocation.

Fig 2: Checking Pressure Plate Does Not Distort

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Pressure plate with stop (position sensor) -arrow-.

Fig 3: Identifying Dual-Mass Flywheel & Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE: To prevent damage when removing the dual mass flywheel, the bolts -B- must not be loosened using an air powered or impact wrench. Loosen and remove the bolts -B- using hand tools only.

-- Rotate the dual mass flywheel -A- until the bolts are centered in the holes -arrows-.

-- Make sure the bolt heads -B- do not touch the flywheel -arrows- when removing them otherwise the flywheel will damage them.

For dual mass flywheel removing and installing, refer to [For engine(s) CPRA, CPKA, CPLA, CPPA] Removal and Installation [For engine(s) CVCA] Removal and Installation [For engine(s) CCTA, CBFA] Removal and Installation [For engine(s) CBUA] Removal and Installation .