LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Front Suspension (Convertible)) >> 40 Front Suspension >> Removal And Installation >> Wheel Bearing >> Wheel Bearing Unit >> Installing

Wheel Bearing Unit: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Install the brake caliper. Refer to Front Brake Caliper .

-- Tighten drive axle bolt onto the wheel hub. Refer to THREADED CONNECTION, LOOSENING AND TIGHTENING .

-- Install the Right Front ABS Wheel Speed Sensor -G45- /Left Front ABS Wheel Speed Sensor -G47-. Refer to RIGHT/LEFT FRONT ABS WHEEL SPEED SENSOR -G45- / -G47- .

-- Install the front wheel and tighten the bolts. Refer to WHEEL BOLT TIGHTENING SPECIFICATIONS .

scientia non olet · About LEMON Manuals