SUBFRAME, Lowering: Removing

-- Turn the steering wheel to the straight-ahead position and remove the ignition key so that the steering wheel lock engages.

Vehicle with "Keyless Access" Keyless Locking and Starting System

-- Switch the ignition off and open the driver door so the steering wheel lock locks.

Continuation for All Vehicles

-- Remove the bolts -1- and cover -2-.

Fig 1: Identifying Footwell Trim Panel

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the screw -arrow- from the universal joint -1-. Then remove the universal joint in direction of -arrow-.

Fig 2: Identifying Universal Joint And Screw

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the lower noise insulation. Refer to NOISE INSULATION OVERVIEW .

-- Remove exhaust system bracket from subframe -arrows-.

Fig 3: Identifying Exhaust System Bracket (Suspended Mount) Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -11- and then remove the pendulum support from the transmission.

Fig 4: Identifying Pendulum Support Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Loosen the double clamp for the exhaust system.

-- Remove the left and right nut -1- from the coupling rod -3-.

Fig 5: Identifying Coupling Rod And Nuts And Stabilizer Bar

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the coupling rod -3- from the stabilizer bar -2- on the left and right sides.

Vehicles with Power Steering

Fig 6: Expansion Hose Routing On Automatic Transmission

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the power steering gear pressure line from the transmission -arrows-.

Continuation for All Vehicles

-- Secure the subframe. Refer to SUBFRAME, SECURING .

-- Move the Engine/Gearbox JackVAG1383A -1- under the subframe.

Fig 7: Identifying Engine/Gearbox Jack

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -5- and -6- and lower the subframe maximum 10 cm.

Fig 8: Identifying Subframe Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.