SUBFRAME, Lowering: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal.

-- Always make sure the intermediate plate -1- is installed between the subframe -2- and the body.

Insert the long side of the intermediate plate -1- so that it is perpendicular to direction of travel. The tabs -arrows- lock into the subframe -2-.

Fig 1: Identifying Intermediate Plate Installed Position

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Beetle Convertible Only

-- Install the subframe brace -1-. Refer to SUBFRAME BRACE .

-- Install the right and left underbody panels. Refer to UNDERBODY PANELS OVERVIEW .

-- Install the lower noise insulation. Refer to NOISE INSULATION OVERVIEW .

Fig 2: Identifying Subframe Brace

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.