LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Front Suspension (Convertible)) >> 40 Front Suspension >> Removal And Installation >> Lower Control Arm And Ball Joint >> Lower Control Arm, Basis >> Installing

Lower Control Arm, Basis: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Install the rear control arm into the subframe in direction of -arrow- and swivel it forward.

Fig 1: Identifying Control Arm
GWWM40-10022Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the front wheel and tighten the bolts. Refer to WHEEL BOLT TIGHTENING SPECIFICATIONS .

scientia non olet · About LEMON Manuals