Test Prerequisites
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
- Ribbed belt/ribbed belt tension OK.
- Sealing of system.
- Hoses/lines are not kinked or constricted.
-- Move the shut-off valve lever on he pressure gauge to -2- and read the pressure.
CAUTION:
Let the engine run in idle and close the shut-off valve on the pressure gauge for not longer than 5 seconds (position -2-).
Specification for Delivery Pressure:
96 to 104 bar
-- If specified value is not obtained, replace power steering pump. Refer to VANE PUMP .
-- Remove the pressure gauge and adapter.
-- Bleed steering system. Refer to STEERING, BLEEDING AFTER REPLACING .
-- Check hydraulic fluid level and fill, if necessary. Refer to POWER STEERING FLUID LEVEL, CHECKING .
-- Check the steering system for leaks. Refer to STEERING, CHECKING FOR LEAKS .