Cooling System

WARNING: This page is about a different car, the 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

Hot steam may escape when opening the expansion tank cap.

Wear protective goggles and protective clothing to prevent damage to eyes and scalding.
Cover the cap with a cloth and open very carefully.

CAUTION:

When doing any repair work, especially in the engine compartment, pay attention to the following due to clearance issues:

Route lines of all types (for example, fuel, hydraulic, Evaporative Emission (EVAP), coolant, refrigerant, brake fluid and vacuum) and electrical wiring so that the original path is followed.
To prevent damage to the lines, make sure there is sufficient clearance to all moving or hot components.

NOTE:

When the engine is warm the cooling system is under pressure. If necessary release pressure before beginning repair work.

Secure all hose connections with hose clamps, allocation.

Use spring type clip pliers to installing spring clamps.

Always replace gaskets and seals.

The arrows on coolant pipes and coolant hoses must line up across from each other.